SANKALPELECTRICALS Enquiry listList

AE · Energy & electrical meters

AE Moving Iron Ammeters & Voltmeters (Slide in Scale)

Price on enquiry

Moving iron analogue panel ammeters and voltmeters with slide-in scale, in 72 and 96 mm square sizes.

Sankalp Electricals is an authorised dealer of Automatic Electric Ltd. (AE). AE products carry AE’s normal warranty of 18 months from supply or 12 months from commissioning, whichever is earlier.

Or call +91 98203 16440

Key features

  • Spring loaded jewel and pivot system; magnetic shielding
  • Efficient oil damping system for near deadbeat pointer movement
  • Indicate true RMS values practically independent of waveform
  • Engineering plastic housing; shrouded terminals on request
  • Initial suppression for voltmeter; end suppression up to 6 times for ammeter
  • CE certified

Technical specifications

Voltmeter
Operating voltage15 V to 600 V; 100 V/110 V for PT secondary
Burden15 V to 30 V < 100 mA; 50 V to 100 V < 30 mA; 110 V to 200 V < 15 mA; 200 V to 600 V < 7.5 mA
Ammeter
Operating current1 A to 100 A in 72 x 72; 1 A to 200 A in 96 x 96; 1 A/5 A for CT secondary
Burden0.25 A to 30 A < 1 VA; above 30 A < 1.5 VA
General specifications
TypeMoving iron, slide in scale
ScaleNon-linear; compressed initially, readability from approx. 10 to 15 degrees
Frequency45 Hz – 65 Hz (400 Hz on request)
AccuracyClass 1.5
Insulation resistanceGreater than 20 MΩ at 500 V DC
Dielectric test2 kV RMS for 1 minute
Overload continuous1.2 times
Overload short time2 times Vn / 10 times In for 5 seconds
Operating temperature-10 °C to 55 °C
Storage temperature-20 °C to 70 °C
HumidityUp to 95% RH
Conforms toI.S. 1248 / I.E.C. 60051 (Part 2)
Mechanical
SMI72 (slide in)72 x 72 x 60 mm; cutout 68 x 68 (+0.7) mm; scale length approx. 60 mm; < 145 g (amps), < 180 g (volts)
SMI96 (slide in)96 x 96 x 60 mm; cutout 92 x 92 (+0.8) mm; scale length approx. 90 mm; < 200 g (amps), < 230 g (volts)
SMI48 (non slide in dial)48 x 48 x 45 mm; cutout 45 x 45 (+0.6) mm; scale length approx. 40 mm; approx. 100 g
SMI144 (non slide in dial)144 x 144 x 50 mm; cutout 138 x 138 (+1.0) mm; scale length approx. 145 mm; approx. 400 g
Ordering information
Specify1) Type 2) Model 3) Operating voltage & PTR for voltmeter 4) Operating current & CTR for ammeter

Ordering codes

CodeRatingDescription
SMI7272 x 72 mmMoving iron meter, slide in scale
SMI9696 x 96 mmMoving iron meter, slide in scale
SMI4848 x 48 mmMoving iron meter, non slide in dial version
SMI144144 x 144 mmMoving iron meter, non slide in dial version

Datasheets & brochures

↓ Manufacturer catalogue (PDF)